Overview
The N3000 Video over IP Series extends the reach of SVSI's Networked AV solutions to the WAN for streaming, video to desktop, digital signage, set-top boxes, or mobile devices applications. Fully integrated with existing Networked AV control options, the N3000 Series delivers the highest quality HD video content at the lowest bandwidth for the most demanding applications. Moving video to or from the Cloud just became a lot easier with the N3000.
The N3000 Series' H.264 compression engine delivers low-latency 1080p60 video at half the bandwidth of comparable encoders. High profile H.264 encoders output unicast or multicast to one or more N3000 Series decoders. Multiple selectable streaming protocols (RTP, RTSP, and more) allow for software endpoints during video to the desktop applications or third-party hardware endpoints like Roku, Amino, or Google TV. Adjustable bit-rates from 32-Kbps to 10-Mbps give the highest video fidelity at the lowest bandwidths on the market in keeping with SVSI's commitment to provide unsurpassed Networked AV quality.
H.264 encoder includes IR, serial, balanced audio, RJ45 and 1GB SFP (fiber or copper) network connections, digital HDMI and analog VGA video input. H.264 encoder card requires NMXACC-N9206 cage.
Common Applications
The NMX-ENC-N3132 is the perfect solution for quality streaming over low bit rate WAN. Common applications include distance education, Multi-Site Enterprise, and IPTV Streaming.
Features
- Power Over Ethernet (PoE) : Eliminates requirement for local power supply and speeds installation. Units can still be powered locally from 12VDC allowing for easy rack-mountable, high-density installations
- Infrared (IR) : Infrared emitter connection allows control of low-cost, IR-only display devices
- Onboard Control : All N-Series encoders and decoders have on-board, built-in control capability via events that can trigger any number of TCP/UDP commands to other IP controllable devices
- Unlimited Scalability
- Pass-Through HDMI : HDMI interface allows easy installation with local display such as desktop PC applications
- Stand Alone or Card : Available as a stand alone device, or card for use with NMX-ACC-N9206
Specifications
| Digital Video Input | HDMI, DVI-D, Dual-Mode DisplayPort (DP++), RGB/VGA; DVI-D and Dual-Mode DisplayPort (DP++) are supported through a passive adapter |
| Analog Video Input | HD-15 VGA, Component, supported through a passive adapter |
| Video Outputs | Network video over Ethernet via RJ45 port or fiber via 1G SFP port, HDMI, DVI-D (through passive adapter) |
| Video Formats | HDMI, DVI-D (through passive adapter), HDCP content protection support, RGBHV, YPbPr |
| Progressive Input Resolutions | Supports most common HD up to 1080p60. See Data Sheet for details. |
| Interlaced Input Resolutions | Supports 1080i60. See Data Sheet for details. |
| Analog Input Resolutions | Supports most common HD up to 1080p60. See Data Sheet for details. |
| Analog-To-Digital Conversion | 8-bit 165 MHz per each of three color channels |
| Audio Input Signal Types | Embedded audio on HDMI (DVI-D through adapter) or Analog Stereo (Balanced or Unbalanced) |
| Audio Output Signal Types | Ethernet, Embedded audio on HDMI or DVI-D (through adapter); HDMI output refers to pass-through video on the HDMI OUT port |
| HDMI Audio Formats | Stereo 2-channel |
| Analog Audio Formats | Stereo 2-channel |
| Audio Analog-to-Digital Conversion | 16-bit 32 kHz, 44.1 kHz and 48 kHz |
| Latency | 175 ms at 60 fps. See Data Sheet for details. |
| Communications | Ethernet: 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP; HDMI: HDCP, EDID management. See Data Sheet for details. |
| FG Numbers | FGN3132-SA |
