AMX NMX-ENC-N3132-C

AMX NMX-ENC-N3132-C

AMX NMX-ENC-N3132-C

AMX NMX-ENC-N3132-C

H.264 Compressed Video over IP Encoder, PoE, SFP, HDMI, USB for Record, Card

SKU: AMX-FGN3132-CD
MSRP: $1,354.00
MAP: $1,010.45

The N3000 Video over IP Series extends the reach of SVSI's Networked AV solutions to the WAN for streaming, video to desktop, digital signage, set-top boxes, or mobile devices applications. Fully integrated with existing Networked AV control options, the N3000 Series delivers the highest quality HD video content at the lowest bandwidth for the most demanding applications. Moving video to or from the Cloud just became a lot easier with the N3000.

The N3000 Series' H.264 compression engine delivers low-latency 1080p60 video at half the bandwidth of comparable encoders. High profile H.264 encoders output unicast or multicast to one or more N3000 Series decoders. Multiple selectable streaming protocols (RTP, RTSP, and more) allow for software endpoints during video to the desktop applications or third-party hardware endpoints like Roku, Amino, or Google TV. Adjustable bit-rates from 32-Kbps to 10-Mbps give the highest video fidelity at the lowest bandwidths on the market in keeping with SVSI's commitment to provide unsurpassed Networked AV quality.

H.264 encoder includes IR, serial, balanced audio, RJ45 and 1GB SFP (fiber or copper) network connections, digital HDMI and analog VGA video input. H.264 encoder card requires NMXACC-N9206 cage.

Common Applications

The NMX-ENC-N3132 is the perfect solution for quality streaming over low bit rate WAN. Common applications include distance education, Multi-Site Enterprise, and IPTV Streaming.

Features

  • Power Over Ethernet (PoE) — Eliminates requirement for local power supply and speeds installation. Units can still be powered locally from 12VDC allowing for easy rack-mountable, high-density installations
  • Infrared (IR) — Infrared emitter connection allows control of low-cost, IR-only display devices
  • Onboard Control — All N-Series encoders and decoders have on-board, built-in control capability via events that can trigger any number of TCP/UDP commands to other IP controllable devices
  • Unlimited Scalability
  • Pass-Through HDMI — HDMI interface allows easy installation with local display such as desktop PC applications
  • Stand Alone or Card — Available as a stand alone device, or card for use with NMX-ACC-N9206

Specifications

Video
  • Digital Video Input:
    • HDMI, DVI-D, Dual-Mode DisplayPort (DP++), RGB/VGA
    • DVI-D and Dual-Mode DisplayPort (DP++) are supported through a passive adapter
  • Analog Video Input
    • HD-15 VGA, Component
    • Component is supported through a passive adapter
  • Video Output
    • Network video over Ethernet via RJ45 port or fiber via 1G SFP port, HDMI, DVI-D
    • DVI-D is supported through a passive adapter
  • Formats: HDMI, DVI-D (through adapter), HDCP content protection support, RGBHV, YPbPr
  • Progressive Input Resolutions
    • Supports most common HD up to 1080p60.
      • *720x480 @ 59Hz, 640x480 @ 60Hz, *720x480 @ 60Hz, *720x576 @ 50Hz, 800x600 @ 56Hz, 800x600 @ 60Hz, *1280x720 @ 50Hz, *1280x720 @ 59Hz, *1280x720 @ 60Hz, 1024x768 @ 60Hz, 1280x800 @ 60Hz, 1440x900 @ 60Hz, 1680x1050 @ 60Hz, 1920x1080 @ 24Hz, 1920x1080 @ 25Hz, 1920x1080 @ 29Hz, 1920x1080 @ 30Hz, *1920x1080 @ 50Hz, *1920x1080 @ 59Hz, *1920x1080 @ 60Hz, *1920x1080i @ 50Hz, *1920x1080i @ 59Hz, *1920x1080i @ 60Hz
  • Interlaced Input Resolutions
    • Supports 1080i60.
      • *720x480 @ 59Hz, 640x480 @ 60Hz, *720x480 @ 60Hz, *720x576 @ 50Hz, 800x600 @ 56Hz, 800x600 @ 60Hz, *1280x720 @ 50Hz, *1280x720 @ 59Hz, *1280x720 @ 60Hz, 1024x768 @ 60Hz, 1280x800 @ 60Hz, 1440x900 @ 60Hz, 1680x1050 @ 60Hz, 1920x1080 @ 24Hz, 1920x1080 @ 25Hz, 1920x1080 @ 29Hz, 1920x1080 @ 30Hz, *1920x1080 @ 50Hz, *1920x1080 @ 59Hz, *1920x1080 @ 60Hz, *1920x1080i @ 50Hz, *1920x1080i @ 59Hz, *1920x1080i @ 60Hz
  • Analog Input Resolutions
    Input resolutions supported @60Hz refresh rates are also supported @59.94Hz
    • Supports most common HD up to 1080p60.
      • *720x480 @ 59Hz, 640x480 @ 60Hz, *720x480 @ 60Hz, *720x576 @ 50Hz, 800x600 @ 56Hz, 800x600 @ 60Hz, *1280x720 @ 50Hz, *1280x720 @ 59Hz, *1280x720 @ 60Hz, 1024x768 @ 60Hz, 1280x800 @ 60Hz, 1440x900 @ 60Hz, 1680x1050 @ 60Hz, 1920x1080 @ 24Hz, 1920x1080 @ 25Hz, 1920x1080 @ 29Hz, 1920x1080 @ 30Hz, *1920x1080 @ 50Hz, *1920x1080 @ 59Hz, *1920x1080 @ 60Hz, *1920x1080i @ 50Hz, *1920x1080i @ 59Hz, *1920x1080i @ 60Hz
  • Output Resolutions: Matched to inputs
  • Analog-To-Digital Conversion: 8-bit 165 MHz per each of three color channels
    The N3132 Encoder does not accept Composite or SVideo (YC)

 

*supported in component mode
Audio
  • Input Signal Types: Embedded audio on HDMI (DVI-D through adapter) or Analog Stereo (Balanced or Unbalanced)
  • Output Signal Types:
    • Ethernet, Embedded audio on HDMI or DVI-D (through adapter)
    • HDMI output refers to pass-through video on the HDMI OUT port
  • HDMI Audio Formats: Stereo 2-channel
  • Analog Audio Formats: Stereo 2-channel
  • Analog-To-Digital Conversion: 16-bit 32 kHz, 44.1 kHz and 48 kHz

 

NOTE: HDMI output refers to pass-through video on the HDMI OUT port.
Latency
  • Latency: 175 ms at 60 fps

 

Note: This is the combined encode plus decode latency. Total latency from source to screen will also include any network latency.

Note: Scaling adds one frame of latency (17ms at 60fps)
Communications
  • Ethernet
    • P0
      • 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP
    • P1
      • 1 Gbps port which accepts compatible fiber transceivers or direct attach cables (fiber or copper cabling)
  • HDMI: HDCP, EDID management
Ports
  • +12V 2A: One 12 Volt DC power input.
  • P0
    • 8-wire RJ45 female
    • 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port
    • Provides the network connection, network AV video, and power to the Encoders and Decoders
  • P1
    • SFP port (SFP fiber transceiver or direct attach cable not included)
    • Provides the network connection and network AV video
  • IR
    • 2-pin terminal Phoenix connector
    • Provides Infrared (IR) output only (33-60 kHz; typically 39 kHz). Emitter may be necessary (not included)
  • RS232
    • 3-pin terminal Phoenix connector
    • Provides a serial control interface. Full duplex communication. Available terminal speed settings: 9600-115200 baud rate
  • AUDIO
    • 5-pin terminal Phoenix connector
    • Provides user-selectable balanced/unbalanced input. Dedicated audio input
  • HDMI OUT: HDMI video output (passive pass-through from HDMI IN)
  • HDMI IN: HDMI video input
  • VGA IN: DB15 analog input
  • USB connector (front panel): One USB-A control input
Controls and Indicators - Front Panel
  • RESET Button
    • Recessed pushbutton
    • Press to initiate a 'warm restart' causing the processor to reset, but not lose power. A reset does NOT affect the current settings
  • ID Button
    • Recessed pushbutton
    • Press to send a notification out on the network to identify the unit (the notification causes a pop-up dialog in N-Able and N-Command)
  • POWER LED
    • On solid (green) when operating power is supplied (via PoE or local power supply)
    • This activity is also shown by the PWR LED on the rear panel
  • STATUS LED
    • On flashing (green) when there is software activity
    • This activity is also shown by the STAT LED on the rear panel
Controls and Indicators - Rear Panel
  • PWR LED: Same as POWER LED described above
  • HDMI LED: On (green) when there is a connection to a valid video source
  • STAT LED: Same as STATUS LED described above
  • STRM LED: On (green) when the unit is streaming video
Environmental
  • Temperature: 32° to 104°F (0° to 40°C)
  • Humidity: 10% to 90% RH (non-condensing)
  • Heat Dissipation: Up to ~44 BTU/Hr
General
  • Regulatory Compliance: FCC, CE, and NTRL
  • Recommended Accessories: NMX-ACC-N9206 (FGN9206), 2RU Rack Mount Cage with Power for Six SVSI N-Series Card Units
FG Numbers FGN3132-CD

AMX NMX-ENC-N3132

AMX

AMX NMX-ENC-N3132

H.264 Compressed Video over IP Encoder, PoE, SFP, HDMI, USB for Record, Stand-alone

MSRP: $1,380.00
MAP: $1,380.00
AMX NMX-ENC-N2412A-C

AMX

AMX NMX-ENC-N2412A-C

JPEG 2000 4K60 4:4:4 & HDR Video Over IP Encoder Card with POE+, KVM, & AES67, Card

MSRP: $2,823.00
MAP: $2,823.00
AMX NMX-ENC-N3312D-C

AMX

AMX NMX-ENC-N3312D-C

NMX-ENC-N3312D-C 4K60 H.26x/Dante AV-H & 1080p H.26x Dual-Stream Encoder Card

MSRP: $1,825.00
MAP: $1,825.00
AMX NMX-ENC-N2135A-C

AMX

AMX NMX-ENC-N2135A-C

JPEG 2000 1080p Low Latency AV over IP Encoder with KVM, PoE, SFP, HDMI, AES67 Support, Card

MSRP: $3,609.00
MAP: $3,609.00
AMX NMX-ENC-N2312-C

AMX

AMX NMX-ENC-N2312-C

N2300 Series 4K UHD Video over IP Card Encoder with KVM, PoE, Card

MSRP: $1,242.00
MAP: $1,242.00
AMX NMX-ENC-N2122A-C

AMX

AMX NMX-ENC-N2122A-C

JPEG 2000 Digital Cinema Grade AV over IP Encoder, PoE, HDMI, AES67 Support, Card

MSRP: $3,307.00
MAP: $3,307.00
AMX NMX-ENC-N1133A-C

AMX

AMX NMX-ENC-N1133A-C

N1000 Series AV Over IP Encoder with KVM, AES67 Support, Card

MSRP: $1,853.00
MAP: $1,382.84