Overview

The AMX SVSI NMX-ENC-N2612S is a cost-effective, powerfully robust multi-codec, dual-stream encoder in a stand-alone box form factor. It features a high-quality, low-latency 4K60 4:4:4 MWC codec that is ideal for encoding both live video and detailed content in classrooms, meeting spaces, courtrooms, bars, and other applications.

High-compatibility, low-bandwidth 1080p H.26x encoding is also included and perfect for distributing video over congested networks and is compatible with third-party devices and networks such as Panopto, Wowza, YouTube, and Facebook.

N2600S models support our Virtual Network USB 2.0 Hub technology. These models not only support transport of full-bandwidth USB 2.0 signals, but also enable USB device signals from up to 4 decoders to be combined and connected to a single USB host on an encoder. A laptop on the meeting room table can now simultaneously connect to multiple remote USB devices such as a camera near the display and an audio DSP in an equipment closet.

Other key features include video preview images viewable from the built-in web interface or from a touch panel and enhanced support for high-security networks.

The NMX-ENC-N2612S supports Dante AV-A, a standard for AVoIP devices created to allow for the interoperability of multiple devices on the network. With Dante AV-A, the NMX-ENC-N2612S is compatible with Dante Controller, Dante Domain Manager, and Dante Director.  All signal routing, configuration, and IT-level management for your audio and video devices can now be managed using the same tools.

With the ability to stream video with multiple technologies, the NMX-ENC-N2612S is compatible with a wide variety of decoders. The MWC stream is fully compatible with the NMX-DEC-N2622S Decoder and NMX-DEC-N2625-WP Decoder Wallplate. The H.26x stream generated by the NMX-ENC-N2612S can be configured to work with N3000 series decoders and the NMX-WP-N3510 Windowing Processor, N3300 series decoders, or 3rd-party devices and streaming services.

Features

•     Dante AV-A
•     High-Quality 4K60 MWC encoding with sub-2ms latency
•     High-Compatibility, Low-Bandwidth 1080p H.26x encoding
•     Video Preview viewable from the built-in web interface or a touch panel
•     Switchable Dual HDMI Inputs
•     Virtual Network USB 2.0 Hub
•     High-security network support and features, including multicast, VLAN tagging, and QoS
•     PoE+ powered with low-power mode for energy savings.
•     HControl
•     Open Direct-Control API
•     UL2043 – Plenum Space certification

Specifications

• Video Inputs: (2) HDMI
• Video Outputs: Network video over Ethernet via RJ45 port, HDMI Loop-Out
• Video Resolution Support: Supports most common resolutions up to 4096 x 2160 - Reference Data Sheet for Specific Resolution Support
• Audio Inputs: Embedded audio on HDMI or Analog Stereo (Balanced)
• Audio Outputs: Network PCM or Dante audio over Ethernet via RJ45, HDMI Loop-Out
• Ports: +12V 2A DC power input, (P0) Gigabit Ethernet port with PoE+ support, (P1) Gigabit Ethernet port, (IR) 2-pin 3.5mm screw terminal, (RS232) 3-pin 3.5mm screw terminal, (Audio) 5-pin 3.5mm screw terminal, HDMI video loop-out, (2) HDMI video input, USB Micro B Host port (front panel), (IR IN) 3-pin 3.5mm screw terminal (front panel)
• Environmental: Temperature - 32° to 104°F (0° to 40°C) Humidity - 10% to 90% RH (non-condensing) Heat Dissipation - Up to ~85 BTU/hr
• Dimensions (H x W x D): 1 1/6" x 7 7/8" x 5" (26.6mm x 200mm x 127mm)
• Product Weight: 2.16 lbs. (Approx. 0.98kg)