The C 562 CM flush-mount Boundary microphone uses the same transducer as the C 562 BL. The C 562 CM has been designed specifically for permanent "invisible" mounting in ceilings walls tables stage props etc.
Owing to its high sensitivity the C 562 CM is a perfect tool for surveillance or live recording since a single microphone can cover an entire room. The supplied XLR phantom power adapter connects to the microphone cable through a miniature connector so installation holes can be smaller than the diameter of the phantom power adapter.
Features:
Small low-profile Boundary layer microphone
Wide frequency range
High sensitivity
Ideal for inconspicuous installation in a room
Suited for surveillance or recording
Specifications
|
General
|
| Audio Frequency bandwidth |
20 to 20000 Hz
|
| Sensitivity |
25 mV/Pa
|
| Equivalent Noise Level |
16 dB-A
|
| Signal to Noise |
78 dB-A
|
| Recommended Load Impedance |
2000 Ohms
|
|
| Powering Interface |
| Voltage |
9 to 52 V
|
| Current |
2 mA
|
|
| Audio Output |
| Type |
Balanced XLR
|
| Gender |
Male
|
| Contacts |
3-pin
|
|
| Design |
| Finish |
matte nickel plated
|
|
| Dimensions / Weight |
| Length |
12 mm
|
| Height |
28 mm
|
| Diameter |
20 mm
|
| Net Weight |
30 g
|
|
