This professional condenser vocal microphone will make your voice cut through the loudest mix - on any stage. Its cardioid polar pattern ensures maximum gain before feedback and has been optimized for use with in-ear monitor systems.
The gold plated transducer case does not only give the microphone a sophisticated esthetic touch but also makes the transducer extremely resistant to corrosion and humidity. The result is superior audio performance.
C 5 WL 1: C 5 microphone element with threaded connection for use with AKG wireless systems.
Features:
- Condenser vocal microphone for onstage use
- XLR connector module with 24-carat gold plated pins
- 24-carat gold plated transducer case for optimum conductivity and resistance to corrosion and humidity
- Spring steel wire-mesh grill for extreme ruggedness incl. reliable control of pops and wind noise
- Shock mount
Specifications
| General | | Audio Frequency bandwidth | 65 to 20000 Hz | | Sensitivity | 4 mV/Pa | | Equivalent Noise Level | 25 dB-A | | Signal to Noise | 49 dB-A | | Electrical Impedance | 200 Ohms | | Recommended Load Impedance | 2000 Ohms |
|
| Polar Patterns | | Cardioid |  | |
| Powering Interface | | Voltage | 9 to 52 V | | Current | 3 mA |
|
| Audio Output | | Type | Balanced XLR | | Gender | Male | | Contacts | 3-pin |
|
| Design | | Body | metal | | Finish | matte grayish blue |
|
| Dimensions / Weight | | Height | 185 mm | | Diameter | 51 - 51 mm | | Net Weight | 345 g |
|
