CHANNEL STYLE BEAM CLAMP
Standard, pre-engineered beam clamps anchor to a building’s beam structure and offer two very predictable off-set rigging points for hanging clusters, arrays and other objects from overhead. This channel style beam clamp is adjustable and mounts flush underneath the beam’s flange. It comes equipped with two eye nuts, one on each side of the flange, for suspending objects from wire rope, rigging chain, spansets, etc.
Standard, pre-engineered beam clamps anchor to a building’s beam structure and offer two very predictable off-set rigging points for hanging clusters, arrays and other objects from overhead. This channel style beam clamp is adjustable and mounts flush underneath the beam’s flange. It comes equipped with two eye nuts, one on each side of the flange, for suspending objects from wire rope, rigging chain, spansets, etc.
Use the BC16-21-2 channel style beam clamp to provide an offset load rated overhead rigging point from structural I-Beams with flange widths ranging between 16” and 21” (406-533 mm). This beam clamp model provides a fast, easy and safe way to rig direct loads, bridles and hitches. A hand wrench is all that is required to secure the clamp to the beam. Beam flanges must be parallel to the floor to achieve the stated safe working loads.
KEY FEATURES:
- Single center hang points for 1/2” to 5/8” dia. threaded rod
- Provides safe load-rated hang points
- Clamps securely to beam flanges ranging from 16”-21”
